This group contains system error codes associated with service operations, device interactions, and system state conditions. Errors in this range may appear during system initialization, service control operations, or hardware-related processes.
| Error | Code | Description |
|---|---|---|
| ERROR_USER_PROFILE_LOAD | 500 (0x1F4) | User profile cannot be loaded. |
| ERROR_ARITHMETIC_OVERFLOW | 534 (0x216) | Arithmetic result exceeded 32 bits. |
| ERROR_PIPE_CONNECTED | 535 (0x217) | There is a process on other end of the pipe. |
| ERROR_PIPE_LISTENING | 536 (0x218) | Waiting for a process to open the other end of the pipe. |
| ERROR_VERIFIER_STOP | 537 (0x219) | Application verifier has found an error in the current process. |
| ERROR_ABIOS_ERROR | 538 (0x21A) | An error occurred in the ABIOS subsystem. |
| ERROR_WX86_WARNING | 539 (0x21B) | A warning occurred in the WX86 subsystem. |
| ERROR_WX86_ERROR | 540 (0x21C) | An error occurred in the WX86 subsystem. |
| ERROR_TIMER_NOT_CANCELED | 541 (0x21D) | An attempt was made to cancel or set a timer that has an associated APC and the subject thread is not the thread that or… |
| ERROR_UNWIND | 542 (0x21E) | Unwind exception code. |
| ERROR_BAD_STACK | 543 (0x21F) | An invalid or unaligned stack was encountered during an unwind operation. |
| ERROR_INVALID_UNWIND_TARGET | 544 (0x220) | An invalid unwind target was encountered during an unwind operation. |
| ERROR_INVALID_PORT_ATTRIBUTES | 545 (0x221) | Invalid Object Attributes specified to NtCreatePort or invalid Port Attributes specified to NtConnectPort |
| ERROR_PORT_MESSAGE_TOO_LONG | 546 (0x222) | Length of message passed to NtRequestPort or NtRequestWaitReplyPort was longer than the maximum message allowed by the p… |
| ERROR_INVALID_QUOTA_LOWER | 547 (0x223) | An attempt was made to lower a quota limit below the current usage. |
| ERROR_DEVICE_ALREADY_ATTACHED | 548 (0x224) | An attempt was made to attach to a device that was already attached to another device. |
| ERROR_INSTRUCTION_MISALIGNMENT | 549 (0x225) | An attempt was made to execute an instruction at an unaligned address and the host system does not support unaligned ins… |
| ERROR_PROFILING_NOT_STARTED | 550 (0x226) | Profiling not started. |
| ERROR_PROFILING_NOT_STOPPED | 551 (0x227) | Profiling not stopped. |
| ERROR_COULD_NOT_INTERPRET | 552 (0x228) | The passed ACL did not contain the minimum required information. |
| ERROR_PROFILING_AT_LIMIT | 553 (0x229) | The number of active profiling objects is at the maximum and no more may be started. |
| ERROR_CANT_WAIT | 554 (0x22A) | Used to indicate that an operation cannot continue without blocking for I/O. |
| ERROR_CANT_TERMINATE_SELF | 555 (0x22B) | Indicates that a thread attempted to terminate itself by default (called NtTerminateThread with NULL) and it was the las… |
| ERROR_UNEXPECTED_MM_CREATE_ERR | 556 (0x22C) | If an MM error is returned which is not defined in the standard FsRtl filter, it is converted to one of the following er… |
| ERROR_UNEXPECTED_MM_MAP_ERROR | 557 (0x22D) | If an MM error is returned which is not defined in the standard FsRtl filter, it is converted to one of the following er… |
| ERROR_UNEXPECTED_MM_EXTEND_ERR | 558 (0x22E) | If an MM error is returned which is not defined in the standard FsRtl filter, it is converted to one of the following er… |
| ERROR_BAD_FUNCTION_TABLE | 559 (0x22F) | A malformed function table was encountered during an unwind operation. |
| ERROR_NO_GUID_TRANSLATION | 560 (0x230) | Indicates that an attempt was made to assign protection to a file system file or directory and one of the SIDs in the se… |
| ERROR_INVALID_LDT_SIZE | 561 (0x231) | Indicates that an attempt was made to grow an LDT by setting its size, or that the size was not an even number of select… |
| ERROR_INVALID_LDT_OFFSET | 563 (0x233) | Indicates that the starting value for the LDT information was not an integral multiple of the selector size. |
| ERROR_INVALID_LDT_DESCRIPTOR | 564 (0x234) | Indicates that the user supplied an invalid descriptor when trying to set up Ldt descriptors. |
| ERROR_TOO_MANY_THREADS | 565 (0x235) | Indicates a process has too many threads to perform the requested action. For example, assignment of a primary token may… |
| ERROR_THREAD_NOT_IN_PROCESS | 566 (0x236) | An attempt was made to operate on a thread within a specific process, but the thread specified is not in the process spe… |
| ERROR_PAGEFILE_QUOTA_EXCEEDED | 567 (0x237) | Page file quota was exceeded. |
| ERROR_LOGON_SERVER_CONFLICT | 568 (0x238) | The Netlogon service cannot start because another Netlogon service running in the domain conflicts with the specified ro… |
| ERROR_SYNCHRONIZATION_REQUIRED | 569 (0x239) | The SAM database on a Windows Server is significantly out of synchronization with the copy on the Domain Controller. A c… |
| ERROR_NET_OPEN_FAILED | 570 (0x23A) | The NtCreateFile API failed. This error should never be returned to an application, it is a place holder for the Windows… |
| ERROR_IO_PRIVILEGE_FAILED | 571 (0x23B) | {Privilege Failed} The I/O permissions for the process could not be changed. |
| ERROR_CONTROL_C_EXIT | 572 (0x23C) | {Application Exit by CTRL+C} The application terminated as a result of a CTRL+C. |
| ERROR_MISSING_SYSTEMFILE | 573 (0x23D) | {Missing System File} The required system file %hs is bad or missing. |
| ERROR_UNHANDLED_EXCEPTION | 574 (0x23E) | {Application Error} The exception %s (0x%08lx) occurred in the application at location 0x%08lx. |
| ERROR_APP_INIT_FAILURE | 575 (0x23F) | {Application Error} The application was unable to start correctly (0x%lx). Click OK to close the application. |
| ERROR_PAGEFILE_CREATE_FAILED | 576 (0x240) | {Unable to Create Paging File} The creation of the paging file %hs failed (%lx). The requested size was %ld. |
| ERROR_INVALID_IMAGE_HASH | 577 (0x241) | Windows cannot verify the digital signature for this file. A recent hardware or software change might have installed a f… |
| ERROR_NO_PAGEFILE | 578 (0x242) | {No Paging File Specified} No paging file was specified in the system configuration. |
| ERROR_ILLEGAL_FLOAT_CONTEXT | 579 (0x243) | {EXCEPTION} A real-mode application issued a floating-point instruction and floating-point hardware is not present. |
| ERROR_NO_EVENT_PAIR | 580 (0x244) | An event pair synchronization operation was performed using the thread specific client/server event pair object, but no … |
| ERROR_DOMAIN_CTRLR_CONFIG_ERROR | 581 (0x245) | A Windows Server has an incorrect configuration. |
| ERROR_ILLEGAL_CHARACTER | 582 (0x246) | An illegal character was encountered. For a multi-byte character set this includes a lead byte without a succeeding trai… |
| ERROR_UNDEFINED_CHARACTER | 583 (0x247) | The Unicode character is not defined in the Unicode character set installed on the system. |
| ERROR_FLOPPY_VOLUME | 584 (0x248) | The paging file cannot be created on a floppy diskette. |
| ERROR_BIOS_FAILED_TO_CONNECT_INTERRUPT | 585 (0x249) | The system BIOS failed to connect a system interrupt to the device or bus for which the device is connected. |
| ERROR_BACKUP_CONTROLLER | 586 (0x24A) | This operation is only allowed for the Primary Domain Controller of the domain. |
| ERROR_MUTANT_LIMIT_EXCEEDED | 587 (0x24B) | An attempt was made to acquire a mutant such that its maximum count would have been exceeded. |
| ERROR_FS_DRIVER_REQUIRED | 588 (0x24C) | A volume has been accessed for which a file system driver is required that has not yet been loaded. |
| ERROR_CANNOT_LOAD_REGISTRY_FILE | 589 (0x24D) | {Registry File Failure} The registry cannot load the hive (file): %hs or its log or alternate. It is corrupt, absent, or… |
| ERROR_DEBUG_ATTACH_FAILED | 590 (0x24E) | {Unexpected Failure in DebugActiveProcess} An unexpected failure occurred while processing a DebugActiveProcess API requ… |
| ERROR_SYSTEM_PROCESS_TERMINATED | 591 (0x24F) | {Fatal System Error} The %hs system process terminated unexpectedly with a status of 0x%08x (0x%08x 0x%08x). The system … |
| ERROR_DATA_NOT_ACCEPTED | 592 (0x250) | {Data Not Accepted} The TDI client could not handle the data received during an indication. |
| ERROR_VDM_HARD_ERROR | 593 (0x251) | NTVDM encountered a hard error. |
| ERROR_DRIVER_CANCEL_TIMEOUT | 594 (0x252) | {Cancel Timeout} The driver %hs failed to complete a cancelled I/O request in the allotted time. |
| ERROR_REPLY_MESSAGE_MISMATCH | 595 (0x253) | {Reply Message Mismatch} An attempt was made to reply to an LPC message, but the thread specified by the client ID in th… |
| ERROR_LOST_WRITEBEHIND_DATA | 596 (0x254) | {Delayed Write Failed} Windows was unable to save all the data for the file %hs. The data has been lost. This error may … |
| ERROR_CLIENT_SERVER_PARAMETERS_INVALID | 597 (0x255) | The parameter(s) passed to the server in the client/server shared memory window were invalid. Too much data may have bee… |
| ERROR_NOT_TINY_STREAM | 598 (0x256) | The stream is not a tiny stream. |
| ERROR_STACK_OVERFLOW_READ | 599 (0x257) | The request must be handled by the stack overflow code. |
| ERROR_CONVERT_TO_LARGE | 600 (0x258) | Internal OFS status codes indicating how an allocation operation is handled. Either it is retried after the containing o… |
| ERROR_FOUND_OUT_OF_SCOPE | 601 (0x259) | The attempt to find the object found an object matching by ID on the volume but it is out of the scope of the handle use… |
| ERROR_ALLOCATE_BUCKET | 602 (0x25A) | The bucket array must be grown. Retry transaction after doing so. |
| ERROR_MARSHALL_OVERFLOW | 603 (0x25B) | The user/kernel marshalling buffer has overflowed. |
| ERROR_INVALID_VARIANT | 604 (0x25C) | The supplied variant structure contains invalid data. |
| ERROR_BAD_COMPRESSION_BUFFER | 605 (0x25D) | The specified buffer contains ill-formed data. |
| ERROR_AUDIT_FAILED | 606 (0x25E) | {Audit Failed} An attempt to generate a security audit failed. |
| ERROR_TIMER_RESOLUTION_NOT_SET | 607 (0x25F) | The timer resolution was not previously set by the current process. |
| ERROR_INSUFFICIENT_LOGON_INFO | 608 (0x260) | There is insufficient account information to log you on. |
| ERROR_BAD_DLL_ENTRYPOINT | 609 (0x261) | {Invalid DLL Entrypoint} The dynamic link library %hs is not written correctly. The stack pointer has been left in an in… |
| ERROR_BAD_SERVICE_ENTRYPOINT | 610 (0x262) | {Invalid Service Callback Entrypoint} The %hs service is not written correctly. The stack pointer has been left in an in… |
| ERROR_IP_ADDRESS_CONFLICT1 | 611 (0x263) | There is an IP address conflict with another system on the network. |
| ERROR_IP_ADDRESS_CONFLICT2 | 612 (0x264) | There is an IP address conflict with another system on the network. |
| ERROR_REGISTRY_QUOTA_LIMIT | 613 (0x265) | {Low On Registry Space} The system has reached the maximum size allowed for the system part of the registry. Additional … |
| ERROR_NO_CALLBACK_ACTIVE | 614 (0x266) | A callback return system service cannot be executed when no callback is active. |
| ERROR_PWD_TOO_SHORT | 615 (0x267) | The password provided is too short to meet the policy of your user account. Please choose a longer password. |
| ERROR_PWD_TOO_RECENT | 616 (0x268) | The policy of your user account does not allow you to change passwords too frequently. This is done to prevent users fro… |
| ERROR_PWD_HISTORY_CONFLICT | 617 (0x269) | You have attempted to change your password to one that you have used in the past. The policy of your user account does n… |
| ERROR_UNSUPPORTED_COMPRESSION | 618 (0x26A) | The specified compression format is unsupported. |
| ERROR_INVALID_HW_PROFILE | 619 (0x26B) | The specified hardware profile configuration is invalid. |
| ERROR_INVALID_PLUGPLAY_DEVICE_PATH | 620 (0x26C) | The specified Plug and Play registry device path is invalid. |
| ERROR_QUOTA_LIST_INCONSISTENT | 621 (0x26D) | The specified quota list is internally inconsistent with its descriptor. |
| ERROR_EVALUATION_EXPIRATION | 622 (0x26E) | {Windows Evaluation Notification} The evaluation period for this installation of Windows has expired. This system will s… |
| ERROR_ILLEGAL_DLL_RELOCATION | 623 (0x26F) | {Illegal System DLL Relocation} The system DLL %hs was relocated in memory. The application will not run properly. The r… |
| ERROR_DLL_INIT_FAILED_LOGOFF | 624 (0x270) | {DLL Initialization Failed} The application failed to initialize because the window station is shutting down. |
| ERROR_VALIDATE_CONTINUE | 625 (0x271) | The validation process needs to continue on to the next step. |
| ERROR_NO_MORE_MATCHES | 626 (0x272) | There are no more matches for the current index enumeration. |
| ERROR_RANGE_LIST_CONFLICT | 627 (0x273) | The range could not be added to the range list because of a conflict. |
| ERROR_SERVER_SID_MISMATCH | 628 (0x274) | The server process is running under a SID different than that required by client. |
| ERROR_CANT_ENABLE_DENY_ONLY | 629 (0x275) | A group marked use for deny only cannot be enabled. |
| ERROR_FLOAT_MULTIPLE_FAULTS | 630 (0x276) | {EXCEPTION} Multiple floating point faults. |
| ERROR_FLOAT_MULTIPLE_TRAPS | 631 (0x277) | {EXCEPTION} Multiple floating point traps. |
| ERROR_NOINTERFACE | 632 (0x278) | The requested interface is not supported. |
| ERROR_DRIVER_FAILED_SLEEP | 633 (0x279) | {System Standby Failed} The driver %hs does not support standby mode. Updating this driver may allow the system to go to… |
| ERROR_CORRUPT_SYSTEM_FILE | 634 (0x27A) | The system file %1 has become corrupt and has been replaced. |
| ERROR_COMMITMENT_MINIMUM | 635 (0x27B) | {Virtual Memory Minimum Too Low} Your system is low on virtual memory. Windows is increasing the size of your virtual me… |
| ERROR_PNP_RESTART_ENUMERATION | 636 (0x27C) | A device was removed so enumeration must be restarted. |
| ERROR_SYSTEM_IMAGE_BAD_SIGNATURE | 637 (0x27D) | {Fatal System Error} The system image %s is not properly signed. The file has been replaced with the signed file. The sy… |
| ERROR_PNP_REBOOT_REQUIRED | 638 (0x27E) | Device will not start without a reboot. |
| ERROR_INSUFFICIENT_POWER | 639 (0x27F) | There is not enough power to complete the requested operation. |
| ERROR_MULTIPLE_FAULT_VIOLATION | 640 (0x280) | |
| ERROR_SYSTEM_SHUTDOWN | 641 (0x281) | The system is in the process of shutting down. |
| ERROR_PORT_NOT_SET | 642 (0x282) | An attempt to remove a processes DebugPort was made, but a port was not already associated with the process. |
| ERROR_DS_VERSION_CHECK_FAILURE | 643 (0x283) | This version of Windows is not compatible with the behavior version of directory forest, domain or domain controller. |
| ERROR_RANGE_NOT_FOUND | 644 (0x284) | The specified range could not be found in the range list. |
| ERROR_NOT_SAFE_MODE_DRIVER | 646 (0x286) | The driver was not loaded because the system is booting into safe mode. |
| ERROR_FAILED_DRIVER_ENTRY | 647 (0x287) | The driver was not loaded because it failed its initialization call. |
| ERROR_DEVICE_ENUMERATION_ERROR | 648 (0x288) | The "%hs" encountered an error while applying power or reading the device configuration. This may be caused by a failure… |
| ERROR_MOUNT_POINT_NOT_RESOLVED | 649 (0x289) | The create operation failed because the name contained at least one mount point which resolves to a volume to which the … |
| ERROR_INVALID_DEVICE_OBJECT_PARAMETER | 650 (0x28A) | The device object parameter is either not a valid device object or is not attached to the volume specified by the file n… |
| ERROR_MCA_OCCURED | 651 (0x28B) | A Machine Check Error has occurred. Please check the system eventlog for additional information. |
| ERROR_DRIVER_DATABASE_ERROR | 652 (0x28C) | There was error [%2] processing the driver database. |
| ERROR_SYSTEM_HIVE_TOO_LARGE | 653 (0x28D) | System hive size has exceeded its limit. |
| ERROR_DRIVER_FAILED_PRIOR_UNLOAD | 654 (0x28E) | The driver could not be loaded because a previous version of the driver is still in memory. |
| ERROR_VOLSNAP_PREPARE_HIBERNATE | 655 (0x28F) | {Volume Shadow Copy Service} Please wait while the Volume Shadow Copy Service prepares volume %hs for hibernation. |
| ERROR_HIBERNATION_FAILURE | 656 (0x290) | The system has failed to hibernate (The error code is %hs). Hibernation will be disabled until the system is restarted. |
| ERROR_PWD_TOO_LONG | 657 (0x291) | The password provided is too long to meet the policy of your user account. Please choose a shorter password. |
| ERROR_FILE_SYSTEM_LIMITATION | 665 (0x299) | The requested operation could not be completed due to a file system limitation. |
| ERROR_ASSERTION_FAILURE | 668 (0x29C) | An assertion failure has occurred. |
| ERROR_ACPI_ERROR | 669 (0x29D) | An error occurred in the ACPI subsystem. |
| ERROR_WOW_ASSERTION | 670 (0x29E) | WOW Assertion Error. |
| ERROR_PNP_BAD_MPS_TABLE | 671 (0x29F) | A device is missing in the system BIOS MPS table. This device will not be used. Please contact your system vendor for sy… |
| ERROR_PNP_TRANSLATION_FAILED | 672 (0x2A0) | A translator failed to translate resources. |
| ERROR_PNP_IRQ_TRANSLATION_FAILED | 673 (0x2A1) | A IRQ translator failed to translate resources. |
| ERROR_PNP_INVALID_ID | 674 (0x2A2) | Driver %2 returned invalid ID for a child device (%3). |
| ERROR_WAKE_SYSTEM_DEBUGGER | 675 (0x2A3) | {Kernel Debugger Awakened} the system debugger was awakened by an interrupt. |
| ERROR_HANDLES_CLOSED | 676 (0x2A4) | {Handles Closed} Handles to objects have been automatically closed as a result of the requested operation. |
| ERROR_EXTRANEOUS_INFORMATION | 677 (0x2A5) | {Too Much Information} The specified access control list (ACL) contained more information than was expected. |
| ERROR_RXACT_COMMIT_NECESSARY | 678 (0x2A6) | This warning level status indicates that the transaction state already exists for the registry sub-tree, but that a tran… |
| ERROR_MEDIA_CHECK | 679 (0x2A7) | {Media Changed} The media may have changed. |
| ERROR_GUID_SUBSTITUTION_MADE | 680 (0x2A8) | {GUID Substitution} During the translation of a global identifier (GUID) to a Windows security ID (SID), no administrati… |
| ERROR_STOPPED_ON_SYMLINK | 681 (0x2A9) | The create operation stopped after reaching a symbolic link. |
| ERROR_LONGJUMP | 682 (0x2AA) | A long jump has been executed. |
| ERROR_PLUGPLAY_QUERY_VETOED | 683 (0x2AB) | The Plug and Play query operation was not successful. |
| ERROR_UNWIND_CONSOLIDATE | 684 (0x2AC) | A frame consolidation has been executed. |
| ERROR_REGISTRY_HIVE_RECOVERED | 685 (0x2AD) | {Registry Hive Recovered} Registry hive (file): %hs was corrupted and it has been recovered. Some data might have been l… |
| ERROR_DLL_MIGHT_BE_INSECURE | 686 (0x2AE) | The application is attempting to run executable code from the module %hs. This may be insecure. An alternative, %hs, is … |
| ERROR_DLL_MIGHT_BE_INCOMPATIBLE | 687 (0x2AF) | The application is loading executable code from the module %hs. This is secure, but may be incompatible with previous re… |
| ERROR_DBG_EXCEPTION_NOT_HANDLED | 688 (0x2B0) | Debugger did not handle the exception. |
| ERROR_DBG_REPLY_LATER | 689 (0x2B1) | Debugger will reply later. |
| ERROR_DBG_UNABLE_TO_PROVIDE_HANDLE | 690 (0x2B2) | Debugger cannot provide handle. |
| ERROR_DBG_TERMINATE_THREAD | 691 (0x2B3) | Debugger terminated thread. |
| ERROR_DBG_TERMINATE_PROCESS | 692 (0x2B4) | Debugger terminated process. |
| ERROR_DBG_CONTROL_C | 693 (0x2B5) | Debugger got control C. |
| ERROR_DBG_PRINTEXCEPTION_C | 694 (0x2B6) | Debugger printed exception on control C. |
| ERROR_DBG_RIPEXCEPTION | 695 (0x2B7) | Debugger received RIP exception. |
| ERROR_DBG_CONTROL_BREAK | 696 (0x2B8) | Debugger received control break. |
| ERROR_DBG_COMMAND_EXCEPTION | 697 (0x2B9) | Debugger command communication exception. |
| ERROR_OBJECT_NAME_EXISTS | 698 (0x2BA) | {Object Exists} An attempt was made to create an object and the object name already existed. |
| ERROR_THREAD_WAS_SUSPENDED | 699 (0x2BB) | {Thread Suspended} A thread termination occurred while the thread was suspended. The thread was resumed, and termination… |
| ERROR_IMAGE_NOT_AT_BASE | 700 (0x2BC) | {Image Relocated} An image file could not be mapped at the address specified in the image file. Local fixups must be per… |
| ERROR_RXACT_STATE_CREATED | 701 (0x2BD) | This informational level status indicates that a specified registry sub-tree transaction state did not yet exist and had… |
| ERROR_SEGMENT_NOTIFICATION | 702 (0x2BE) | {Segment Load} A virtual DOS machine (VDM) is loading, unloading, or moving an MS-DOS or Win16 program segment image. An… |
| ERROR_BAD_CURRENT_DIRECTORY | 703 (0x2BF) | {Invalid Current Directory} The process cannot switch to the startup current directory %hs. Select OK to set current dir… |
| ERROR_FT_READ_RECOVERY_FROM_BACKUP | 704 (0x2C0) | {Redundant Read} To satisfy a read request, the NT fault-tolerant file system successfully read the requested data from … |
| ERROR_FT_WRITE_RECOVERY | 705 (0x2C1) | {Redundant Write} To satisfy a write request, the NT fault-tolerant file system successfully wrote a redundant copy of t… |
| ERROR_IMAGE_MACHINE_TYPE_MISMATCH | 706 (0x2C2) | {Machine Type Mismatch} The image file %hs is valid, but is for a machine type other than the current machine. Select OK… |
| ERROR_RECEIVE_PARTIAL | 707 (0x2C3) | {Partial Data Received} The network transport returned partial data to its client. The remaining data will be sent later… |
| ERROR_RECEIVE_EXPEDITED | 708 (0x2C4) | {Expedited Data Received} The network transport returned data to its client that was marked as expedited by the remote s… |
| ERROR_RECEIVE_PARTIAL_EXPEDITED | 709 (0x2C5) | {Partial Expedited Data Received} The network transport returned partial data to its client and this data was marked as … |
| ERROR_EVENT_DONE | 710 (0x2C6) | {TDI Event Done} The TDI indication has completed successfully. |
| ERROR_EVENT_PENDING | 711 (0x2C7) | {TDI Event Pending} The TDI indication has entered the pending state. |
| ERROR_CHECKING_FILE_SYSTEM | 712 (0x2C8) | Checking file system on %wZ. |
| ERROR_FATAL_APP_EXIT | 713 (0x2C9) | {Fatal Application Exit} %hs. |
| ERROR_PREDEFINED_HANDLE | 714 (0x2CA) | The specified registry key is referenced by a predefined handle. |
| ERROR_WAS_UNLOCKED | 715 (0x2CB) | {Page Unlocked} The page protection of a locked page was changed to 'No Access' and the page was unlocked from memory an… |
| ERROR_SERVICE_NOTIFICATION | 716 (0x2CC) | %hs |
| ERROR_WAS_LOCKED | 717 (0x2CD) | {Page Locked} One of the pages to lock was already locked. |
| ERROR_LOG_HARD_ERROR | 718 (0x2CE) | Application popup: %1 : %2 |
| ERROR_ALREADY_WIN32 | 719 (0x2CF) | |
| ERROR_IMAGE_MACHINE_TYPE_MISMATCH_EXE | 720 (0x2D0) | {Machine Type Mismatch} The image file %hs is valid, but is for a machine type other than the current machine. |
| ERROR_NO_YIELD_PERFORMED | 721 (0x2D1) | A yield execution was performed and no thread was available to run. |
| ERROR_TIMER_RESUME_IGNORED | 722 (0x2D2) | The resumable flag to a timer API was ignored. |
| ERROR_ARBITRATION_UNHANDLED | 723 (0x2D3) | The arbiter has deferred arbitration of these resources to its parent. |
| ERROR_CARDBUS_NOT_SUPPORTED | 724 (0x2D4) | The inserted CardBus device cannot be started because of a configuration error on "%hs". |
| ERROR_MP_PROCESSOR_MISMATCH | 725 (0x2D5) | The CPUs in this multiprocessor system are not all the same revision level. To use all processors the operating system r… |
| ERROR_HIBERNATED | 726 (0x2D6) | The system was put into hibernation. |
| ERROR_RESUME_HIBERNATION | 727 (0x2D7) | The system was resumed from hibernation. |
| ERROR_FIRMWARE_UPDATED | 728 (0x2D8) | Windows has detected that the system firmware (BIOS) was updated [previous firmware date = %2, current firmware date %3]… |
| ERROR_DRIVERS_LEAKING_LOCKED_PAGES | 729 (0x2D9) | A device driver is leaking locked I/O pages causing system degradation. The system has automatically enabled tracking co… |
| ERROR_WAKE_SYSTEM | 730 (0x2DA) | The system has awoken. |
| ERROR_WAIT_1 | 731 (0x2DB) | |
| ERROR_WAIT_2 | 732 (0x2DC) | |
| ERROR_WAIT_3 | 733 (0x2DD) | |
| ERROR_WAIT_63 | 734 (0x2DE) | |
| ERROR_ABANDONED_WAIT_0 | 735 (0x2DF) | |
| ERROR_ABANDONED_WAIT_63 | 736 (0x2E0) | |
| ERROR_USER_APC | 737 (0x2E1) | |
| ERROR_KERNEL_APC | 738 (0x2E2) | |
| ERROR_ALERTED | 739 (0x2E3) | |
| ERROR_ELEVATION_REQUIRED | 740 (0x2E4) | The requested operation requires elevation. |
| ERROR_REPARSE | 741 (0x2E5) | A reparse should be performed by the Object Manager since the name of the file resulted in a symbolic link. |
| ERROR_OPLOCK_BREAK_IN_PROGRESS | 742 (0x2E6) | An open/create operation completed while an oplock break is underway. |
| ERROR_VOLUME_MOUNTED | 743 (0x2E7) | A new volume has been mounted by a file system. |
| ERROR_RXACT_COMMITTED | 744 (0x2E8) | This success level status indicates that the transaction state already exists for the registry sub-tree, but that a tran… |
| ERROR_NOTIFY_CLEANUP | 745 (0x2E9) | This indicates that a notify change request has been completed due to closing the handle which made the notify change re… |
| ERROR_PRIMARY_TRANSPORT_CONNECT_FAILED | 746 (0x2EA) | {Connect Failure on Primary Transport} An attempt was made to connect to the remote server %hs on the primary transport,… |
| ERROR_PAGE_FAULT_TRANSITION | 747 (0x2EB) | Page fault was a transition fault. |
| ERROR_PAGE_FAULT_DEMAND_ZERO | 748 (0x2EC) | Page fault was a demand zero fault. |
| ERROR_PAGE_FAULT_COPY_ON_WRITE | 749 (0x2ED) | Page fault was a demand zero fault. |
| ERROR_PAGE_FAULT_GUARD_PAGE | 750 (0x2EE) | Page fault was a demand zero fault. |
| ERROR_PAGE_FAULT_PAGING_FILE | 751 (0x2EF) | Page fault was satisfied by reading from a secondary storage device. |
| ERROR_CACHE_PAGE_LOCKED | 752 (0x2F0) | Cached page was locked during operation. |
| ERROR_CRASH_DUMP | 753 (0x2F1) | Crash dump exists in paging file. |
| ERROR_BUFFER_ALL_ZEROS | 754 (0x2F2) | Specified buffer contains all zeros. |
| ERROR_REPARSE_OBJECT | 755 (0x2F3) | A reparse should be performed by the Object Manager since the name of the file resulted in a symbolic link. |
| ERROR_RESOURCE_REQUIREMENTS_CHANGED | 756 (0x2F4) | The device has succeeded a query-stop and its resource requirements have changed. |
| ERROR_TRANSLATION_COMPLETE | 757 (0x2F5) | The translator has translated these resources into the global space and no further translations should be performed. |
| ERROR_NOTHING_TO_TERMINATE | 758 (0x2F6) | A process being terminated has no threads to terminate. |
| ERROR_PROCESS_NOT_IN_JOB | 759 (0x2F7) | The specified process is not part of a job. |
| ERROR_PROCESS_IN_JOB | 760 (0x2F8) | The specified process is part of a job. |
| ERROR_VOLSNAP_HIBERNATE_READY | 761 (0x2F9) | {Volume Shadow Copy Service} The system is now ready for hibernation. |
| ERROR_FSFILTER_OP_COMPLETED_SUCCESSFULLY | 762 (0x2FA) | A file system or file system filter driver has successfully completed an FsFilter operation. |
| ERROR_INTERRUPT_VECTOR_ALREADY_CONNECTED | 763 (0x2FB) | The specified interrupt vector was already connected. |
| ERROR_INTERRUPT_STILL_CONNECTED | 764 (0x2FC) | The specified interrupt vector is still connected. |
| ERROR_WAIT_FOR_OPLOCK | 765 (0x2FD) | An operation is blocked waiting for an oplock. |
| ERROR_DBG_EXCEPTION_HANDLED | 766 (0x2FE) | Debugger handled exception. |
| ERROR_DBG_CONTINUE | 767 (0x2FF) | Debugger continued. |
| ERROR_CALLBACK_POP_STACK | 768 (0x300) | An exception occurred in a user mode callback and the kernel callback frame should be removed. |
| ERROR_COMPRESSION_DISABLED | 769 (0x301) | Compression is disabled for this volume. |
| ERROR_CANTFETCHBACKWARDS | 770 (0x302) | The data provider cannot fetch backwards through a result set. |
| ERROR_CANTSCROLLBACKWARDS | 771 (0x303) | The data provider cannot scroll backwards through a result set. |
| ERROR_ROWSNOTRELEASED | 772 (0x304) | The data provider requires that previously fetched data is released before asking for more data. |
| ERROR_BAD_ACCESSOR_FLAGS | 773 (0x305) | The data provider was not able to interpret the flags set for a column binding in an accessor. |
| ERROR_ERRORS_ENCOUNTERED | 774 (0x306) | One or more errors occurred while processing the request. |
| ERROR_NOT_CAPABLE | 775 (0x307) | The implementation is not capable of performing the request. |
| ERROR_REQUEST_OUT_OF_SEQUENCE | 776 (0x308) | The client of a component requested an operation which is not valid given the state of the component instance. |
| ERROR_VERSION_PARSE_ERROR | 777 (0x309) | A version number could not be parsed. |
| ERROR_BADSTARTPOSITION | 778 (0x30A) | The iterator's start position is invalid. |
| ERROR_MEMORY_HARDWARE | 779 (0x30B) | The hardware has reported an uncorrectable memory error. |
| ERROR_DISK_REPAIR_DISABLED | 780 (0x30C) | The attempted operation required self healing to be enabled. |
| ERROR_INSUFFICIENT_RESOURCE_FOR_SPECIFIED_SHARED_SECTION_SIZE | 781 (0x30D) | The Desktop heap encountered an error while allocating session memory. There is more information in the system event log… |
| ERROR_SYSTEM_POWERSTATE_TRANSITION | 782 (0x30E) | The system power state is transitioning from %2 to %3. |
| ERROR_SYSTEM_POWERSTATE_COMPLEX_TRANSITION | 783 (0x30F) | The system power state is transitioning from %2 to %3 but could enter %4. |
| ERROR_MCA_EXCEPTION | 784 (0x310) | A thread is getting dispatched with MCA EXCEPTION because of MCA. |
| ERROR_ACCESS_AUDIT_BY_POLICY | 785 (0x311) | Access to %1 is monitored by policy rule %2. |
| ERROR_ACCESS_DISABLED_NO_SAFER_UI_BY_POLICY | 786 (0x312) | Access to %1 has been restricted by your Administrator by policy rule %2. |
| ERROR_ABANDON_HIBERFILE | 787 (0x313) | A valid hibernation file has been invalidated and should be abandoned. |
| ERROR_LOST_WRITEBEHIND_DATA_NETWORK_DISCONNECTED | 788 (0x314) | {Delayed Write Failed} Windows was unable to save all the data for the file %hs; the data has been lost. This error may … |
| ERROR_LOST_WRITEBEHIND_DATA_NETWORK_SERVER_ERROR | 789 (0x315) | {Delayed Write Failed} Windows was unable to save all the data for the file %hs; the data has been lost. This error was … |
| ERROR_LOST_WRITEBEHIND_DATA_LOCAL_DISK_ERROR | 790 (0x316) | {Delayed Write Failed} Windows was unable to save all the data for the file %hs; the data has been lost. This error may … |
| ERROR_BAD_MCFG_TABLE | 791 (0x317) | The resources required for this device conflict with the MCFG table. |
| ERROR_DISK_REPAIR_REDIRECTED | 792 (0x318) | The volume repair could not be performed while it is online. Please schedule to take the volume offline so that it can b… |
| ERROR_DISK_REPAIR_UNSUCCESSFUL | 793 (0x319) | The volume repair was not successful. |
| ERROR_CORRUPT_LOG_OVERFULL | 794 (0x31A) | One of the volume corruption logs is full. Further corruptions that may be detected won't be logged. |
| ERROR_CORRUPT_LOG_CORRUPTED | 795 (0x31B) | One of the volume corruption logs is internally corrupted and needs to be recreated. The volume may contain undetected c… |
| ERROR_CORRUPT_LOG_UNAVAILABLE | 796 (0x31C) | One of the volume corruption logs is unavailable for being operated on. |
| ERROR_CORRUPT_LOG_DELETED_FULL | 797 (0x31D) | One of the volume corruption logs was deleted while still having corruption records in them. The volume contains detecte… |
| ERROR_CORRUPT_LOG_CLEARED | 798 (0x31E) | One of the volume corruption logs was cleared by chkdsk and no longer contains real corruptions. |
| ERROR_ORPHAN_NAME_EXHAUSTED | 799 (0x31F) | Orphaned files exist on the volume but could not be recovered because no more new names could be created in the recovery… |
| ERROR_OPLOCK_SWITCHED_TO_NEW_HANDLE | 800 (0x320) | The oplock that was associated with this handle is now associated with a different handle. |
| ERROR_CANNOT_GRANT_REQUESTED_OPLOCK | 801 (0x321) | An oplock of the requested level cannot be granted. An oplock of a lower level may be available. |
| ERROR_CANNOT_BREAK_OPLOCK | 802 (0x322) | The operation did not complete successfully because it would cause an oplock to be broken. The caller has requested that… |
| ERROR_OPLOCK_HANDLE_CLOSED | 803 (0x323) | The handle with which this oplock was associated has been closed. The oplock is now broken. |
| ERROR_NO_ACE_CONDITION | 804 (0x324) | The specified access control entry (ACE) does not contain a condition. |
| ERROR_INVALID_ACE_CONDITION | 805 (0x325) | The specified access control entry (ACE) contains an invalid condition. |
| ERROR_FILE_HANDLE_REVOKED | 806 (0x326) | Access to the specified file handle has been revoked. |
| ERROR_IMAGE_AT_DIFFERENT_BASE | 807 (0x327) | An image file was mapped at a different address from the one specified in the image file but fixups will still be automa… |
| ERROR_EA_ACCESS_DENIED | 994 (0x3E2) | Access to the extended attribute was denied. |
| ERROR_OPERATION_ABORTED | 995 (0x3E3) | The I/O operation has been aborted because of either a thread exit or an application request. |
| ERROR_IO_INCOMPLETE | 996 (0x3E4) | Overlapped I/O event is not in a signaled state. |
| ERROR_IO_PENDING | 997 (0x3E5) | Overlapped I/O operation is in progress. |
| ERROR_NOACCESS | 998 (0x3E6) | Invalid access to memory location. |
| ERROR_SWAPERROR | 999 (0x3E7) | Error performing inpage operation. Requirements Expand table Requirement Value Minimum supported client Windows XP [desk… |